General Eng.MCQ's-4




1)      Transformer works under the principle of ______________
a)      Electronic induction
b)      Electromagnetic mutual Induction
c)      Both of them
d)      None of them
Ans: - b

2)      What is the purpose of a filter in the power supply?
a)      To convert the pulsating DC into a smooth DC.
b)      To convert the pulsating DC into a varying AC
c)      To convert the varying AC into a pulsating DC.
d)      To convert the smooth DC into a pulsating DC.
Ans: - a

3)      P-type semiconductor material has a /an
a)      Excess of electrons
b)      Excess of neutrons
c)      Deficiency of electrons
d)      Deficiency of protons
Ans: - c

4)      Barrier potential for Si diode is –
a)      0.3 v
b)      0.9 v
c)      0.7 v
d)      0.5 v
Ans: - c

5)      Common Base (CB) amplifier, amplifies ___________
a)      Current
b)      Power
c)      Voltage
d)      None of them
Ans: - c

6)      Ripple factor of Half wave rectifier is –
a)      0.48
b)      1.21
c)      Both of them
d)      None of them
Ans: - b

7)      In the correctly based transistor, the base-emitter junction is ______________ biased, while the base-collector junction is ____________ biased.
a)      Forward, reverse.
b)      Forward, forward
c)      Reverse, forward
d)      Reverse, reverse
Ans: - a

8)      Capacitance is ____________ proportional to the spacing between the plates.
a)      Directly
b)      Indirectly
c)      Have no relation
d)      None of the above
Ans: - d

9)      Efficiency of a rectifier is 80.6%. The rectifier is ___________.  (Multiple choice)
a)      Half wave
b)      Full wave rectifier
c)      Bridge rectifier
d)      All of them
Ans: - b, c

10)  Bridge rectifier has _______ diode/s.
a)      1 Diode
b)      2 Diodes
c)      3 Diodes
d)      4 Diodes
Ans: - d

11)  An example of pentavalent Impurity is ____________.
a)      Arsenic
b)      Boron
c)      Gallium
d)      Pentium
Ans: - a

12)  ___________ configuration in transistor is used for power amplification.
a)      Common Collector
b)      Common Base
c)      Common emitter
d)      None
Ans: - c

13)  In the common emitter the output signal is _______ degree out of phase with the input signal.
a)      180
b)      90
c)      45
d)      360
Ans: - a

14)  Find the total current in following figure
a)      2mA
b)      4mA
c)      3mA
d)      5mA
Ans: - c

15)  The equivalent resistance of the following circuit is
a)      5 K ohm         
b)      3 K ohm         
c)      2 K ohm         
d)      6 K ohm
Ans: - a

16)  Capacitor input filter or pie filter consists of
a)      One capacitor
b)      Two capacitors and one choke
c)      One capacitors and one choke
d)      Two capacitors and two chokes
Ans: - b

17)  Common collector (CC), amplifies ___________
a)      Power
b)      Current
c)      Voltage
d)      None of them
Ans: - b

18)  Which semiconductor materials are used in LED? (Multiple choice)
a)      Gallium Arsenide Phosphide
b)      Carbon
c)      Gallium Phosphide
d)      None of the above.
Ans: - a, c

19)  What is the voltage between terminals A and B in following Figure?

a)      3.0 volts
b)      4.5 volts
c)      6.0 volts
d)      9.0 volts
Ans: - d

20)  LED emits light when the holes and electrons near its junction:
a)      Separate
b)      Recombine
c)      Are forced to flow away from the junction
d)      Are forced to flow towards the junction without recombining.
Ans: - b

21)  State whether following statement is true or false.
“The photodiode is most commonly subjected to a forward bias voltage.”
a)      True
b)      False
Ans: - b

22)  Phototransistor is widely used in:                           (Multiple choice)
a)      Door bell
b)      Smoke and flame detector
c)      Object counting
d)      Mechanical positioning and moving systems
Ans: - b, c, d

23)  What is the total resistance of the circuit across terminal A and B of following figure?
                                  
a)      28 Ω
b)      12 Ω
c)      45 Ω
d)      24 Ω
Ans: - d

24)  What is the current shown in the following figure?
a)      0.02 A
b)      20 mA
c)      200 mA
d)      2 mA
Ans: - c

25)  From the following options, which are the best conductors?         (Multiple choice)
a)      Silver
b)      Wood
c)      Copper
d)      Plastic
Ans: - a, c

26)  State whether the following statement is true or false.
“The outermost shell of any atom is called as valence shell.”
a)      True
b)      False
Ans: - a

27)  A valence shell is considered “filled” when it contains ___ electrons.
a)      4
b)      8
c)      16
d)      32
Ans: - b

28)  The total resistance in a parallel circuit must be ___________ any individual resistance in the circuit.
a)      Less than
b)      Equal to
c)      Greater than / equal to
d)      Greater than
Ans: - a

29)  In Ohm’s law the current is __________ proportional to resistance.
a)      Inversely
b)      Directly
Ans: - a

30)  If the 0.2 mA current passes through a resistor of 12 KΩ, how much voltage will get developed across the same resistor?
a)      24V
b)      240V
c)      2.4V
d)      0.24V
Ans: - c

31)  _______ current flows through a 10Ω resistor when 5V is applied.
a)      5A
b)      5mA
c)      0.5mA
d)      0.5A
Ans: - d

32)  State whether following statement is true or false
“The sum of the voltage drops is always equal to sum of voltage rise.”
a)      True
b)      False
Ans: - a

33)  In full wave rectification, if the input frequency is 50Hz, then what will be the output frequency?
a)      10Hz
b)      50Hz
c)      25Hz
d)      100Hz
Ans: - b

34)  In a transistor the ____________ is lightly doped.
a)      Emitter
b)      Collector
c)      Base
d)      Cathode
Ans: - c

35)  In a transistor the emitter is _________ doped
a)      Heavily
b)      Lightly
c)      Moderately
d)      None of the above.
Ans: - a

36)  LED converts electrical energy into ________ energy.
a)      Heat
b)      Chemical
c)      Sound
d)      Light
Ans: - d

37)  Conductance G is equal to
a)      R/R
b)      R*R
c)      1/R
d)      None of them
Ans: - c

38)  V = ________
a)      I/R
b)      I2R
c)      R/I
d)      IR
Ans: - d

39)  If value of R is 84 KΩ, + 5% then the color code is
a)      Green, Orange, Red, Silver
b)      Grey, Yellow, Orange, Gold
c)      Green, Orange, Red, Gold
d)      Grey, Yellow, Orange, Silver
Ans: - b

40)  If V = 5v, R = 1 KΩ, then I =?
a)      5A
b)      50A
c)      5 mA
d)      0.5 mA
Ans: - c

41)  Ammeter is always connected in _________
a)      Series
b)      Parallel
c)      Star
d)      Shunt
Ans: - a

42)  Which of the following is a soldering tool?                                   (Multiple choice)
a)      Pleezer
b)      Tweezers
c)      Bleezer
d)      Solder gun
Ans: - b, d

43)  When we increase resistance keeping voltage constant; the current will __________.
a)      Decreased
b)      Same
c)      Increased
d)      Doubled
Ans: - a

44)  Ohm’s law is                                                          (Multiple choice)
a)      V = R/I
b)      V = IR
c)      I = VR
d)      I = V/ R
Ans: - b, d

45)  If total resistance is sum of all resistors then connection will be in ___________.
a)      Shunt
b)      Series
c)      Parallel
d)      Star-delta
Ans: - b

46)  Do not sit under _________ while soldering.
a)      Light
b)      Roof
c)      Fan
d)      None of them
Ans: - c

47)  Capacitance is ____________ to the dielectric constant.
a)      Same as
b)      Directly proportional
c)      Inversely proportional
d)      None of them
Ans: - b

48)  The act of recovering the energy is called __________ the capacitor.
a)      Transferring
b)      Releasing
c)      Charging
d)      Discharging
Ans: - d

49)  The voltage at any particular point on the waveform is generally referred to as _____________.
a)      Peak value
b)      Average value
c)      Effective value
d)      None of them
Ans: - d

50)  If an atom of potassium contains 19 electrons; then how many electrons would be there in last shell?
a)      1
b)      4
c)      8
d)      9
Ans: - a